The radar sensor LED fluorescent lamp using the doppler effect principle, independent research and development planar antennas receiving circuit, electromagnetic environment around intelligent detection, automatically adjust the working status
The radar sensor LED fluorescent lamp using the doppler effect principle, independent research and development planar antennas receiving circuit, electromagnetic environment around intelligent detection, automatically adjust the working status;
Resting, low power consumption is generally 2-2.5 W, and according to the environmental changes;
An object moves, automatic induction work at full capacity, 10 to 18 w (0.6 or 1.2 m) of LED tube;
Full load working time: 2 seconds to 60 seconds according to the environmental changes;
Induction sensitivity: 1-10 meters;
Constant current flow accuracy can reach 2%;
Quick response time, the LED response time is nanosecond;
Light source :ultra-bright white 2835 SMD LED;
Working voltage AC100-277V;
Instant response , no strobe light wave;
High efficiency , low power consumption;
Long life span with high stability and advanced heat dissipation technology;
Independent of the structure and design patents, compact structure, beautiful appearance;
Wide selection of color temperature: 3000～12000K;
Energy-saving, can save energy more 80% than traditional fluorescent lights;
Installation of lighting, please read these instructions carefully;
Lighting installation, depending on the connection and installation testing and certification provider;
in the local regulations;
Lights should always pay attention to the installation or replacement;
Before using the product in accordance with local voltage requirements, please check the product;
Entirely by the manufacturer or service agent or a similar qualified person replaced in order to avoid danger;
Switch induction distance is farther, perspective is wide, no dead zone, can penetrate glass, and wood veneers, according to different power, can penetrate the different thickness of the wall, is not affected by environment, temperature, dust, etc, in the case of 37 degrees, not shorten the induction distance.Radar switch is an ideal upgrade infrared switch products.
|Model NO.||Size (A) mm||Size (B) mm||Size (C) Interfaces|
|LED light number||UU-TUBE-T8-Z2-9||UU-TUBE-T8-Z2-12||UU-TUBE-T8-Z2-18||UU-TUBE-T8-Z2-22|
|Input Voltage||85-264V AC 50Hz|
|Luminous Flux Output||750~920lm||1050~1250lm||1550~1850lm||1850~2250lm|
|Light Source||SMD 2835 LED|
|LED quantity||48 PCS||72 PCS||96 PCS||120 PCS|
|Operating Temperature||﹣20－＋45 Degrees|
|Storage Temperature||﹣30－＋60 Degrees|
|Color Temperature||WW / NW / PW|
|LED’S Operating Life||50,000 Hours|
|Weight||225 ± 5g||355 ± 5g||403 ± 5g||498 ± 5g|
CCT Range : WW(3000±300K) NW(4200±300K) PW(6200±300K)
The radar sensor LED fluorescent lamp using the doppler effect principle, independent research and development planar antennas receiving circuit, electromagnetic environment around intelligent detection, automatically adjust the working status.
|Specificatio||Length (mm)||Weight (KG)||Remark|
|0.6 M||635||11.5||Per carton|
5 * 5 pcs
Working temperature： -20～40℃
Working humidity ： 30%～85%
Storage temperature： -30～65℃
Storage humidity： 10%～90%.
Our LED panel light can only fixed with corresponding LED power our company provided,please don't try to use other companies’ LED power .
In order to ensure the product work properly, please use the power supply within indicating voltage range.
Please turn off the power supply for the lamp holder to avoid the risk of electric shock while installing or uninstalling the product.
Do not use the products in the high humidity or dust environment for ensuring performance,including but not limited to the following environment: bathroom, sauna room, polishing workshop.
Do not look directly at LED light source for a long time, because the high-intensity light source may cause harm to eyes.
Please contact a qualified electrician for repair services when you find the following problems,and do not disassemble the tube light:
Electronic components are exposed to rain or other liquids splash.
Products release smell gas, abnormal sound and unusual flash.
The shell is broken .Debris goes into the bracket or the tube.
If it is not caused by improper operation, please confirm whether it is because of the following reasons or not. If the problem cannot be solved after taking direction method ,please stop using and contact a qualified electrician.
The lamp does not light after connecting the power supply.
▲ Carefully check all wiring is correct.
The lamp flashes when it is powered on.
▲ Please call a qualified electrician to check whether the power supply voltage is lower than the required.
This specification is for reference only,we reserve the right to change without notice.If you need the updated info,please contact local distributors or visit our website at www.uu-lighting.com
|File Name||Updated||Format||Click to download|
|UU-TUBE-T8-Z2 Specifications||2015-09-12 15:04:05||Click to download|
1.Specifications are subject to change without notice;
2.If there is no specification or file attached, please feel free to contact us to get the specification or relative information. Thanks!
Dear Sir or Madam:
Should you have any further question about our company, products, lighting solutions or any other question, please feel free to contact us, we will deal with you message within 24hours.
Sales and Service Department
UU Lighting Limited.